Advertising hats need to be aware of when doing thermal transfer printing
Jason
2019-02-25 17:34:47
Advertising hats in the heat transfer needs to pay attention to the matter, advertising hat factory in the hat heat transfer machine, the size of the lower bracket to be correct, this is very important.
With the passage of time and the development of the times, hats are constantly innovating, and at present, the ruler of the cap
Is getting smaller, such as an old-fashioned hat with a foam cutting edge, with a cap of 3.5 to 4 inches in height, while the current advertising hat factory's popular hexagonal hat and five-horned golf hat have a cap height of 3 inches.
According to the advertising Hat factory guidance and recommendations set the temperature on the hat transfer machine, if the use of cold stripping ink, then the temperature is generally set to 350 degrees, if the use of hot stripping ink, then the temperature is generally set to 375 degrees.
With the passage of time and the development of the times, hats are constantly innovating, and at present, the ruler of the cap
Is getting smaller, such as an old-fashioned hat with a foam cutting edge, with a cap of 3.5 to 4 inches in height, while the current advertising hat factory's popular hexagonal hat and five-horned golf hat have a cap height of 3 inches.
According to the advertising Hat factory guidance and recommendations set the temperature on the hat transfer machine, if the use of cold stripping ink, then the temperature is generally set to 350 degrees, if the use of hot stripping ink, then the temperature is generally set to 375 degrees.